Mildura · Victoria · Preliminary planning report
Preliminary planning report for Mildura, VIC
A $150 desktop planning assessment for any address in Mildura. We take the parcel from the state cadastre, sweep the zoning and overlay mapping at the parcel, read the planning scheme and ResCode in force and cite it by clause, and set out in writing what was checked and what was not. Prepared and professionally reasoned by our planning team and delivered within three business days.
What governs a site in Mildura
In Victoria every council administers a planning scheme made up of zones, overlays and schedules. The state-wide content comes from the Victoria Planning Provisions; the schedules are where the council’s local settings sit, so the same zone can carry different requirements in two municipalities.
For housing, ResCode sets the design standards: clause 54 for one dwelling on a lot, clause 55 for two or more dwellings, and clause 56 for subdivision. Plan Melbourne and the regional growth plans are the strategic layer above the scheme.
VicPlan is the state’s official planning map, where the zone and overlay maps for every scheme are published.
The instruments the report reads in Victoria
- Municipal planning scheme · zones, overlays and schedules
- Victoria Planning Provisions · the state-wide content every scheme draws on
- ResCode · clauses 54, 55 and 56
- Plan Melbourne and the regional growth plans · the strategic layer
Council website: www.mildura.vic.gov.au
How the report works for a site in Mildura
The same five steps for every site in Australia, applied to the planning scheme and ResCode that governs Mildura. Nothing is stated that was not checked, and what was not checked is stated.
Step 1
Parcel from the state cadastre
We take the parcel from the state cadastre and project it, so the report is about the lot itself and not a point on a street.
Step 2
Zoning and overlays swept at the parcel
The zoning and overlay mapping is swept at the parcel boundary, not at a single point, so a layer that touches one corner of the block is caught.
Step 3
The instrument in force, cited by clause
We read the planning instrument in force and cite it by clause, with its version and date, so every statement in the report can be checked at the source.
Step 4
Nearby applications where a public register exists
Where the council keeps a public register of applications, we read the nearby ones and cite what we found. We do not hold a database of decisions for the council.
Step 5
A written statement of what was not checked
Anything the report did not check is stated in writing, so you know the edges of the answer as well as the answer.
Two reports, one price
Have a plan, or not yet?
The Preliminary Planning Report assesses the project you describe. The What’s Possible report sets out the scenarios the site supports when you have not settled on one. Both are $150 and both follow the five steps.
Get the What’s Possible report for Mildura
We do not hold a database of Mildura decisions. Where Mildura council publishes a public register of applications, the report reads the nearby ones and cites what it found. Our free block checker covers South East Queensland only, so it is not offered for Mildura.
Taking a Mildura project through to lodgement
DA projects are quoted individually. We take a limited number at a time so each gets a director’s attention, and we reply within one business day with availability.
The usual order is the report first, then the conversation. The report gives both of us the site facts before anyone is briefed.
Planning reports in Mildura: FAQs
What governs what I can build in Mildura?
In Victoria every council administers a planning scheme made up of zones, overlays and schedules. The state-wide content comes from the Victoria Planning Provisions; the schedules are where the council’s local settings sit, so the same zone can carry different requirements in two municipalities. VicPlan is the state’s official planning map, where the zone and overlay maps for every scheme are published.
What does the $150 report check for a site in Mildura?
Five things, for every site. The parcel is taken from the state cadastre and projected. The zoning and overlay mapping is swept at the parcel boundary rather than at a point. The planning instrument in force is read and cited by clause, with its version and date. Where a public register of applications exists, nearby applications are read and cited. And the report states in writing anything it did not check.
How long does the report take?
Three business days. Each report is prepared and professionally reasoned by our planning team for the specific parcel; it is not generated on the spot.
Do you publish approval rates or decision data for Mildura?
No. We do not hold a database of Mildura decisions, and this page does not quote approval rates, application counts, timeframes or fees for Mildura. Where Mildura council publishes a public register of applications, the report reads the nearby ones and cites what it found; where it does not, the report says so.
Can I use the free block checker for a Mildura address?
No. The free block checker covers South East Queensland only and is not offered for Mildura. For a site in Mildura the $150 report is the way to get a checked answer.
Can Casa run my development application in Mildura?
DA projects are quoted individually. We take a limited number at a time so each gets a director’s attention, and we reply within one business day with availability.
Neighbouring councils in Victoria
Know your Mildura site before you commit
A $150 report for any address in Mildura: the parcel, the zoning and overlays at the parcel, the planning scheme and ResCode cited by clause, and a written statement of what was not checked. Prepared and professionally reasoned by our planning team and delivered within three business days.